Forums FAQForums FAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister   ProfileProfile   Login to check your private messagesLogin to check your private messages   LoginLogin 

DDR Metal Pad Buying Guide
 
This topic is locked you cannot edit posts or make replies    DDR Freak Forum Index -> Bemani Controllers
View previous topic :: View next topic  
Author Message
SwiftDancer
Trick Member
Trick Member


Joined: 22 Mar 2002
0. PostPosted: Sat Nov 01, 2003 11:05 pm    Post subject: DDR Metal Pad Buying Guide Reply with quote

Ok, I am sick of all of these unorganized threads etc.. lets make this thread a discussion of which Metal pads are best to get for what price range...
Ok from what I have seen
$300-$400 Price Range
Cobalt Flux http://www.cobaltflux.com
$200-$300 Price Range

$100-$200 Price Range
DDR Homepad's Design http://www.geocities.com/ddrhomepad/
$199 - Red Octane Metal Pad - http://www.redoctane.com/redoctanemetalpad.html

The general consensus is that this is a good metal pad. It uses polycarbonate panels, foil contacts, and has a 60-day money-back guarantee. Also of note is that this model has about 2 inches of extra metal on the back, presumably to prevent slipping off the pad, or possibly for future additon of a trick bar.

This model uses a replaceable control box for electronics, with "start" and "select" buttons on the box. In the future, PC and XBox compatable control boxes will be available. However, unless you don't have a PSX or PS2, I would recommend getting a PC/PSX or XBox/PSX controller converter instead.

$149 - Cypher Games Playstation Dance Revolution Metal Platform - http://www.cyphergames.com/50501046.html

The general consensus is that this is an acceptable metal pad. It uses acrylic panels, foil contacts, and comes with a 14-day Guarantee (against defects only - otherwise a 15% fee applies.)

I can't tell offhand where the electronics are, but I assume that they're in an external control box. Any corrections would be appreciated.

$139 - Buy 'n' Shop BNS v2.51 Dance Revolution Hard Metal Dance Platform Pad - http://www.buynshop.com/productinfo/44/VG-DDR-MPD

The general consensus is that this is an acceptable to good metal pad. It uses 'polycarbonated' panels, foil contacts, and comes with a 30-day Guarantee (against defects only - otherwise a 15% fee applies.)

The electronics are in an external control box, with start and select buttons on the box. Also of note is the fact that Buy 'n' Shop seems to be in direct competition with Red Octane. Both pads use roughly the same design (though the differences are more than cosmetic - for example, this pad doesn't have extra 2 inches in the back, and has metal corner pieces instead of diagonal arrows) Since BNS released a soft pad with foam inserts that was more or less identical with Red Octane's Ignition at half the price, history may be repeating itself.

Also, for $199, you can purchase the BNSUSA Evolution Dance Pad - It looks identical to this pad, except for the 'elevated technology.'

$109 - Lik-Sang Metal Dance Platform Deluxe with Rail - http://www.lik-sang.com/info.php?category=0&products_id=3681&

I don't know anything about this pad, except the fact that it has a trick bar on the back. Lik-Sang doesn't seem to offer any sort of warranty or guarantee on this pad, either.

Variable Price - Build your own - http://www.geocities.com/ddrhomepad/

Nothing more needs to be said, really.

Variable Price - eBay pads - www.ebay.com

With eBay, you can get all sorts of pads, including some not mentioned here. However, eBay pads are quite variable. You may get a low price, you may not. You may get a working pad, you may not. Unfortunately, most resellers don't seem to give or honor existing warranties or guarantees without excessive badgering, so be on guard.

Please tell me a good pad for 200-300 range and also, if you think I should add some or remove some or modify any of these.

I think this thread will benefit those who want to buy a metal pad, but does not feel like looking through all of the assorted threads.


Last edited by SwiftDancer on Wed Nov 05, 2003 6:49 pm, edited 1 time in total
Back to top
View users profile Send private message AOL Instant Messenger MSN Messenger
Tha DDR Playa
Trick Member
Trick Member


Joined: 03 Oct 2003
Location: On DDR, Neva Half-Steppin'
1. PostPosted: Sun Nov 02, 2003 6:24 am    Post subject: Re: DDR Metal Pad Buying Guide Reply with quote

SwiftDancer wrote:
Ok, I am sick of all of these unorganized threads etc.. lets make this thread a discussion of which Metal pads are best to get for what price range...
Ok from what I have seen
$300-$400 Price Range
Cobalt Flux http://www.cobaltflux.com
$200-$300 Price Range
?
$100-$200 Price Range
DDR Homepad's Design http://www.geocities.com/ddrhomepad/

Please tell me a good pad for 200-300 range and also, if you think I should add some or remove some or modify any of these.

I think this thread will benefit those who want to buy a metal pad, but does not feel like looking through all of the assorted threads.


$200-300 price range would be Red Octane Metal Pad my friend. Choose wisely
_________________
I AM Digitally Remastered 4 Optimal Performance!!!
Tha Audience Iz Watchin'......
When I Get Dat Feelin', I Play A Dose Of Healin' Vision
Back to top
View users profile Send private message Yahoo Messenger
diabloslayer469
Trick Member
Trick Member


Joined: 15 Feb 2003
Location: Neo-Geo Land
2. PostPosted: Sun Nov 02, 2003 10:26 am    Post subject: Reply with quote

You should also write the pros and cons for each pad. Like for the RO, the pro could be thats its only 200 and has poly-carbonated panels, and the con could be foil contacts.
_________________
Liability insurance Forum


Last edited by diabloslayer469 on Sat Mar 07, 2009 6:56 am, edited 1 time in total
Back to top
View users profile Send private message
Heffenfeffer
Trick Member
Trick Member


Joined: 22 Apr 2002
Location: Las Cruces, NM
3. PostPosted: Tue Nov 04, 2003 1:07 pm    Post subject: The story so far... Reply with quote

Hey, I'm also in the market for a metal pad (actually, two, so that I can finally practice doubles without having to invest in parachute pants for token carrying) Here's what I think of the pads from what I've heard on this forum.

(Huge Disclaimer: I don't actually own any metal pad, and still have yet to use most of them described here. This info is what I've got from people posting on this forum and from manufacturer's web-sites. That's what I mean when I say general consensus - your mileage may vary. Also, I am not a doctor, nor do I play one on TV. Finally, you should stay away from the deadly chemical: Dihydrogen Monoxide. Not only is it a major component in acid rain, but accidental inhalation of it can be fatal.)

$299 - Cobalt Flux Pad - http://www.cobaltflux.com

The general consensus is that this pad is the pad to beat. It uses sheet metal contacts, polycarbonate panels, and comes with a six-month warranty in which the platform will be repaired free of charge. Also of note is that this model is compatable with a doubles bar (for an additional charge) that will space the pads at arcade width.

This model uses a replaceable control box for electronics, though the "start" and "select" buttons are on the pad itself (but they only trigger in the rear to minimize game-resetting mishaps.)

$199 - Red Octane Metal Pad - http://www.redoctane.com/redoctanemetalpad.html

The general consensus is that this is a good metal pad. It uses polycarbonate panels, foil contacts, and has a 60-day money-back guarantee. Also of note is that this model has about 2 inches of extra metal on the back, presumably to prevent slipping off the pad, or possibly for future additon of a trick bar.

This model uses a replaceable control box for electronics, with "start" and "select" buttons on the box. In the future, PC and XBox compatable control boxes will be available. However, unless you don't have a PSX or PS2, I would recommend getting a PC/PSX or XBox/PSX controller converter instead.

$149 - Cypher Games Playstation Dance Revolution Metal Platform - http://www.cyphergames.com/50501046.html

The general consensus is that this is an acceptable metal pad. It uses acrylic panels, foil contacts, and comes with a 14-day Guarantee (against defects only - otherwise a 15% fee applies.)

I can't tell offhand where the electronics are, but I assume that they're in an external control box. Any corrections would be appreciated.

$139 - Buy 'n' Shop BNS v2.51 Dance Revolution Hard Metal Dance Platform Pad - http://www.buynshop.com/productinfo/44/VG-DDR-MPD

The general consensus is that this is an acceptable to good metal pad. It uses 'polycarbonated' panels, foil contacts, and comes with a 30-day Guarantee (against defects only - otherwise a 15% fee applies.)

The electronics are in an external control box, with start and select buttons on the box. Also of note is the fact that Buy 'n' Shop seems to be in direct competition with Red Octane. Both pads use roughly the same design (though the differences are more than cosmetic - for example, this pad doesn't have extra 2 inches in the back, and has metal corner pieces instead of diagonal arrows) Since BNS released a soft pad with foam inserts that was more or less identical with Red Octane's Ignition at half the price, history may be repeating itself.

Also, for $199, you can purchase the BNSUSA Evolution Dance Pad - It looks identical to this pad, except for the 'elevated technology.'

$109 - Lik-Sang Metal Dance Platform Deluxe with Rail - http://www.lik-sang.com/info.php?category=0&products_id=3681&

I don't know anything about this pad, except the fact that it has a trick bar on the back. Lik-Sang doesn't seem to offer any sort of warranty or guarantee on this pad, either.

Variable Price - Build your own - http://www.geocities.com/ddrhomepad/

Nothing more needs to be said, really.

Variable Price - eBay pads - www.ebay.com

With eBay, you can get all sorts of pads, including some not mentioned here. However, eBay pads are quite variable. You may get a low price, you may not. You may get a working pad, you may not. Unfortunately, most resellers don't seem to give or honor existing warranties or guarantees without excessive badgering, so be on guard.

Well, that's what I've got - did I leave out any major players? Hope this helps!

- Heffenfeffer[/b]
_________________
"If something should happen to me, all the world's women will grieve!" - Edgar Rene Figaro

"Your charisma exceeds that of mortal men. Many would lay down their lives for you." - Fall-From-Grace
Back to top
View users profile Send private message AOL Instant Messenger
Mikeweiser
Trick Member
Trick Member


Joined: 15 Feb 2003
Location: Saginaw, MI
4. PostPosted: Tue Nov 04, 2003 1:48 pm    Post subject: Reply with quote

Someone please replace the first post, with the post above.
Back to top
View users profile Send private message
diabloslayer469
Trick Member
Trick Member


Joined: 15 Feb 2003
Location: Neo-Geo Land
5. PostPosted: Wed Nov 05, 2003 3:24 pm    Post subject: Reply with quote

He forgot to say that the RO pads currently use cheap foil. Which makes them bad. That cyphergames pad isn't an acceptable pad! It uses cheap foil and acrylic which easily breaks! It is a very poor pad! All pads with foil are going to have problems with the contacts! The lik-sang pad is no good. It uses acrylic, which easily breaks, and I believe it also uses foil.
_________________
Mercedes O405


Last edited by diabloslayer469 on Sat Mar 07, 2009 6:56 am, edited 1 time in total
Back to top
View users profile Send private message
Guderian
Trick Member
Trick Member


Joined: 14 Jul 2003
Location: Mendon, MA
6. PostPosted: Wed Nov 05, 2003 7:56 pm    Post subject: Reply with quote

Were you expecting him to say expensive foil?


It's foil, not all acrylic arrows are gonna break, some very satisfied people have them. This thread is trying to be biased so it can be a resource to all others.
_________________
~~
Huh? I don't get it...
Back to top
View users profile Send private message AOL Instant Messenger
Display posts from previous:   
This topic is locked you cannot edit posts or make replies    DDR Freak Forum Index -> Bemani Controllers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2 © 2001, 2002 phpBB Group